Visualization of RNA-Seq results with heatmap2

Authors: orcid logoMaria Doyle avatar Maria Doyle
Overview
Creative Commons License: CC-BY Questions:

  • How to generate heatmaps from RNA-seq data?

Objectives:

  • Create heatmaps of RNA-seq data

Requirements:
Time estimation: 1 hour
Supporting Materials:
Published: Dec 31, 2018
Last modification: Nov 9, 2023
License: Tutorial Content is licensed under Creative Commons Attribution 4.0 International License. The GTN Framework is licensed under MIT
PURL: https://gxy.io/GTN:T00303
Rating: 5.0 (3 recent ratings, 18 all time)
Revision: 13

Heatmaps are commonly used to visualize RNA-Seq results. They are useful for visualizing the expression of genes across the samples. In this tutorial we show how the heatmap2 tool in Galaxy can be used to generate heatmaps. The heatmap2 tool uses the heatmap.2 function from the R gplots package. Here we will demonstrate how to make a heatmap of the top differentially expressed (DE) genes in an RNA-Seq experiment, similar to what is shown for the fruitfly dataset in the RNA-seq ref-based tutorial. We will also show how a heatmap for a custom set of genes an be created.

To generate a heatmap of RNA-seq results, we need a file of normalized counts. This file is provided for you here. The expression values have been normalized for differences in sequencing depth and composition bias between the samples. To generate this file yourself, see the RNA-seq counts to genes tutorial, and run limma-voom selecting “Output Normalised Counts Table?”: Yes. You could also use a file of normalized counts from other RNA-seq differential expression tools, such as edgeR or DESeq2. We also need some genes to plot in the heatmap.

The data for this tutorial comes from a Nature Cell Biology paper, EGF-mediated induction of Mcl-1 at the switch to lactation is essential for alveolar cell survival), Fu et al. 2015. This study examined the expression profiles of basal and luminal cells in the mammary gland of virgin, pregnant and lactating mice. Six groups are present, with one for each combination of cell type and mouse status.

Tutorial Dataset. Open image in new tab

Figure 1: Tutorial Dataset
Agenda

In this tutorial, we will deal with:

  1. Preparing the inputs
    1. Import data
  2. Create heatmap of top DE genes
    1. Extract all significant genes
    2. Extract the top significant genes
    3. Extract the normalized counts for top genes
    4. Create heatmap of top genes
  3. Create heatmap of custom genes
    1. Extract normalized counts for custom genes
    2. Create heatmap of custom genes
  4. Conclusion

Preparing the inputs

We will use three files for this analysis:

  • Normalized counts file (genes in rows, samples in columns)
  • Differentially expressed results file (genes in rows, columns for P values and log fold change)
  • Genes of interest (custom list of genes to be visualized in heatmap)

Import data

Hands-on: Data upload

  1. Create a new history for this RNA-seq exercise e.g. RNA-seq heatmap

    To create a new history simply click the icon at the top of the history panel:

    UI for creating new history

    1. Click on (Edit) next to the history name (which by default is “Unnamed history”)
    2. Type the new name
    3. Click on Save
    4. To cancel renaming, click the “Cancel” button

    If you do not have the (Edit) next to the history name (which can be the case if you are using an older version of Galaxy) do the following:

    1. Click on Unnamed history (or the current name of the history) (Click to rename history) at the top of your history panel
    2. Type the new name
    3. Press Enter

  2. Import the normalized counts table.

    To import the file, there are two options:

    • Option 1: From a shared data library if available (ask your instructor)
    • Option 2: From Zenodo
    • Copy the link location

    • Click Upload Data at the top of the tool panel

    • Select Paste/Fetch Data

    • Paste the link(s) into the text field

    • Press Start

    • Close the window

    As an alternative to uploading the data from a URL or your computer, the files may also have been made available from a shared data library:

    1. Go into Data (top panel) then Data libraries
    2. Navigate to the correct folder as indicated by your instructor.
      • On most Galaxies tutorial data will be provided in a folder named GTN - Material –> Topic Name -> Tutorial Name.
    3. Select the desired files
    4. Click on Add to History near the top and select as Datasets from the dropdown menu

    5. In the pop-up window, choose

      • “Select history”: the history you want to import the data to (or create a new one)
    6. Click on Import

    • You can paste the links below into the Paste/Fetch box:

      https://zenodo.org/record/2529926/files/limma-voom_normalised_counts
https://zenodo.org/record/2529926/files/limma-voom_luminalpregnant-luminallactate
https://zenodo.org/record/2529926/files/heatmap_genes

    • Select “Genome”: mm10

  3. Rename the counts dataset as normalized counts, the limma-voom_luminalpregnant-luminallactate file as DE results and the list of genes as heatmap genes using the (pencil) icon.

  4. Check that the datatype is tabular. If the datatype is not tabular, please change the file type to tabular.

    • Click on the pencil icon for the dataset to edit its attributes
    • In the central panel, click Datatypes tab on the top
    • In the Assign Datatype, select tabular from “New type” dropdown
      • Tip: you can start typing the datatype into the field to filter the dropdown menu
    • Click the Save button

Click on the (eye) icon of the the DE results file and take a look. It should look like below with 8 columns (just the first few rows are shown).

DE results. Open image in new tab

Figure 2: DE results

Create heatmap of top DE genes

First we’ll demonstrate how to create a heatmap of the top differentially expressed genes in an RNA-seq dataset. To do this we need to extract the differentially expressed genes from the DE results file. This file contains the results from comparing gene expression in the luminal cells in the pregnant versus lactating mice. It includes genes that are not significantly differentially expressed. As in the RNA-seq counts to genes tutorial), we’ll call genes significantly differentially expressed in this dataset if they pass the thresholds of adjusted P value < 0.01 and fold change of > 1.5 (log2FC of 0.58).

Extract all significant genes

Hands-on: Extract the significant genes
  1. Filter data on any column using simple expressions with the following parameters to extract genes with adj P < 0.01:
    • “Filter”: DE results
    • “With following condition”: c8<0.01
    • “Number of header lines to skip”: 1
  2. Filter data on any column using simple expressions with the following parameters to extract genes with absolute fold change > 1.5 (log2fc of 0.58):
    • “Filter”: output of Filter
    • “With following condition”: abs(c4)>0.58
    • “Number of header lines to skip”: 1
  3. Rename file to Significant genes

Extract the top significant genes

This gives us a file with all the significant genes, the genes that pass our thresholds for statistical and biological significance. As we can see there are many genes (~1,610), too many to plot in one heatmap, so we’ll select the top 20 by P value.

Hands-on: Extract the top significant genes by P value
  1. Sort data in ascending or descending order with the following parameters to sort by P value:
    • “Sort Query”: output of 2nd Filter
    • “Number of header lines to skip”: 1
    • “on Column”: 7
    • “in”: Ascending order
    • “Flavor”: General numeric sort ( scientific notation -g)
  2. Select first lines from a dataset with the following parameters to select top genes:
    • “Select first”: 21 (20 genes plus header row)
    • “from”: output of Sort
    • Rename file as top 20 by Pvalue

Extract the normalized counts for top genes

Now we have a file that contains only the top 20 genes from the DE results. Next we need to get the normalized counts for these genes, from the file containing the normalized counts for all genes in the experiment, and then extract just the columns we need for the heatmap (the normalized counts and gene labels).

First click on the (eye) icon and take a look at the normalized counts file that we imported. It should look like below (just the first few rows and columns are shown). Note that the normalized count values are log2. We will join our top 20 by Pvalue file to the normalized counts file, matching on the ENTREZID columns.

Normalized counts. Open image in new tab

Figure 3: Normalized counts
Hands-on: Extract the normalized counts for the top genes
  1. Join two Datasets side by side on a specified field with the following parameters to join on the ENTREZID column:
    • “Join”: the top 20 by Pvalue file
    • “using column”: Column: 1
    • “with”: normalized counts file
    • “and column”: Column: 1
    • “Keep the header lines”: Yes

    The generated file has more columns than we need for the heatmap. In addition to the columns with normalized counts (in log2), there is the \(log\_{2} FC\) and other information. We need to remove the extra columns.

  2. Cut columns from a table to extract the columns with the gene symbols and normalized counts
    • “Cut columns”: c2,c12-c23
    • “Delimited by”: Tab
    • “From”: the joined dataset (output of Join two Datasets )

The file should look like below with the 20 genes in the rows and the 12 samples in the columns (just the first few columns are shown).

Heatmap input. Open image in new tab

Figure 4: Heatmap input

Now that we have our file with just the normalized counts for the genes we want, we can create a heatmap.

Create heatmap of top genes

Hands-on: Plot the heatmap of top genes
  1. heatmap2 with the following parameters:
    • “Input should have column headers”: output of Cut
    • “Data transformation”: Plot the data as it is
    • “Enable data clustering”: No
    • “Labeling columns and rows”: Label my columns and rows
    • “Coloring groups”: Blue to white to red
    • “Data scaling”: Scale my data by row (scale genes)

You should see a heatmap like below. Note that here we are plotting the top genes differentially expressed in the luminal cells from the pregnant mice (MCL1.LC and MCL1.LD) versus the luminal cells from the lactating mice (MCL1.LE and MCL1.LF). This heatmap enables us to see the expression of these genes in all the samples from the different groups in the experiment (basal virgin, basal pregnant, basal lactating, luminal virgin, luminal pregnant, luminal lactating).

Heatmap of top DE genes. Open image in new tab

Figure 5: Heatmap of top DE genes
Question
  1. Why do we not use clustering here?
  2. Why do we scale the rows (genes)? Try rerunning heatmap2 changing the “Data scaling” parameter to Do not scale my data.
  3. The genes are ordered by P value. Can you make the heatmap with the genes ordered by fold change? Hint: Sort by the logFC column in ascending order to have the genes downregulated in the luminal pregnant vs lactating (negative fold change) at the top and the upregulated genes (positive fold change) at the bottom.

  4. How could we make a heatmap of the top 10 most upregulated and top 10 most downregulated significant genes?

    1. We don’t use clustering here as we want to keep the genes in the order we input (ordered by P value).
    2. We scale the genes as otherwise large expression values from highly expressed genes would dominate the plot, see below.
      Heatmap with no scaling. Open image in new tab

      Figure 6: Heatmap without scaling genes
    3. To make the heatmap with these genes ordered by logFC, we could Sort the output of the Join step on the logFC column, then Cut the columns as before and remake the heatmap. It should look like below.
      Heatmap sorted by logFC. Open image in new tab

      Figure 7: Heatmap sorted by logFC
    4. To make a heatmap of the most upregulated and downregulated significant genes, we could Sort on the logFC column (instead of P value above), then use the Select first and Select last tools to select the genes with the largest and smallest fold changes (10 genes for each) and the Concatenate tool to combine the outputs of the first and last Selects into one file. We would then repeat the Join and Cut steps as before to get the normalized counts and make the heatmap as below (Note that one gene name in the middle is missing as it is a gene that has NA for gene symbol)
      Heatmap for top logFC. Open image in new tab

      Figure 8: Heatmap of top 10 up and down

Create heatmap of custom genes

You can also create a heatmap for a custom set of genes. To demonstrate this, we will create a heatmap for the 31 genes in Figure 6b from the original paper using this dataset (see below). These 31 genes include the authors’ main gene of interest in the paper, Mcl1, and a set of cytokines/growth factors identified as differentially expressed. We will recreate this heatmap here. To see how to visualize these genes in a volcano plot see the tutorial here.

Fu heatmap. Open image in new tab

Figure 9: Fu et al, Nat Cell Biol 2015

These 31 genes are in the file we imported called heatmap genes, shown below.

Heatmap genes. Open image in new tab

Figure 10: Heatmap genes

As in the previous example, we need to extract the normalized counts for just these 31 genes. To do that we will join the heatmap genes file with the normalized counts file, on the Gene Symbol columns this time (instead of ENTREZID), and then extract the columns we need.

Extract normalized counts for custom genes

Hands-on: Extract the normalized counts for the genes of interest
  1. Join two Datasets side by side on a specified field with the following parameters:
    • “Join”: the heatmap genes file
    • “using column”: Column: 1
    • “with”: normalized counts file
    • “and column”: Column: 2
    • “Keep the header lines”: Yes
  2. Cut columns from a table to extract the columns with the gene ids and normalized counts
    • “Cut columns”: c1,c5-c16
    • “Delimited by”: Tab
    • “From”: the joined dataset (output of Join two Datasets )

    The genes are in rows and the samples in columns, we could leave the genes in rows but we will transpose to have genes in columns and samples in rows as in the Figure in the paper.

  3. Transpose to have samples in rows and genes in columns
    • “Input tabular dataset”:
      • “From”: the Cut dataset (output of Cut )

We now have a table with the 31 genes in columns and the normalized counts for the 12 samples in rows, similar to below (just the first few columns are shown).

Transposed input. Open image in new tab

Figure 11: Transposed input

Create heatmap of custom genes

Hands-on: Plot the heatmap of custom genes
  1. heatmap2 with the following parameters:
    • “Input should have column headers”: the generated table (output of Transpose )
    • “Data transformation”: Plot the data as it is
    • “Enable data clustering”: No
    • “Labeling columns and rows”: Label my columns and rows
    • “Coloring groups”: Blue to white to red
    • “Data scaling”: Scale my data by column (scale genes)

You should see a heatmap like below.

Fu heatmap regenerated. Open image in new tab

Figure 12: Fu heatmap regenerated
Question

How does the heatmap compare to the one from the Fu paper Fig 6 (above)?

The heatmap looks similar to the heatmap in the paper.

Conclusion

In this tutorial we have seen how heatmaps can be used to visualize RNA-seq results using the heatmap2 tool in Galaxy. We use the same dataset from the tutorials, RNA-seq reads to counts, RNA-seq counts to genes, RNA-seq genes to pathways and Visualization of RNA-Seq results with Volcano Plot.